We skip navigation

Musashi Engineering, Inc. of dispenser

Top page > Product information > Peripheral device > Valve > Piston control valve

Contents start

Piston control valve

In correspondence with low to high viscosity liquid materials, we are belonging to case back system

Piston control valve <br> PCV-5 ・It supports wide liquid materials of low middle・high viscosity
Piston control valve.
・Piston stroke adjusting mechanism, anti-dripping
We are equipped with case back mechanism of this.
・1 port that conversion from syringe method is easily
Type /PCV-5-1P is line-up, too.


Drive system2 port control (fukudo piston)1 port control (spring offset type)
Valve structurePoppet valve
The smallest dispensing volume50 mg
Adaptation liquid materials viscosity~300Pa・ s (~300,000cps)
Operation air pressure0.3 - 0.7MPa(3 - 7lgf/cm2)
Maximum Fluid feed pressure0.7MPa(7kgf/cm2)
Maximum reply number of times100 times of /min.
Connection diameterLiquid entranceφ 6 X φ 4 Fluid feed coupling
Liquid discharge openingLure lock
Air operation portExternal diameter φ 6 one-touch coupling (with speed controller)
Operating temperature limits5~60 degrees Celsius
Weight (weight)320 g390 g
Wetted part materialAluminum, SUS, fluoric resin, fluorine-containing rubber

※Dispensing volume of this Specifications, adaptation viscosity, adaptation materials are reference levels.

External representation (PCV-5-1P)

External representation (PCV-5-1P)
Inquiry from website is this

To inquiry form